Yes, we can drill and do cut outs for electrical sockets etc, however there are some strict rules regarding cut outs and drill hole
General Rules – Cut Outs in Toughened Glass
Socket cut outs have to be a minimum of 50mm in from the edge of glass and a minimum of 50mm away from each other.
Drill holes need to be a diameter of at least the thickness of the glass, these need to be positioned at least 1.5 x the diameter away from any edge or any other cut out.
- This is a quite complex area if you have a panel that has multiple cut outs, please email us a drawing for approval prior to ordering.